Polyethylene
We supply the polyethylene resins commonly used for bags, film, containers, and light pipe. Grade name, melt flow, and density are confirmed on the offer for the cargo available.
Typical grades
- HDPE film
- HDPE blow moulding
- HDPE injection
- LDPE film
- LLDPE film and rotomoulding
There is no single melt-flow figure for every grade. The number is stated with the grade name on the offer.
Request this productPolypropylene
Polypropylene mostly goes into woven bags, fibre, plastic furniture, and injection parts. We name the family — homo or copolymer — and the expected use before the price is confirmed.
Typical grades
- Homopolymer raffia
- Homopolymer injection
- Impact copolymer
- Random copolymer
A raffia grade is not an automatic substitute for an injection grade.
Request this productPVC
Local demand is concentrated on suspension resin for pipe and fittings. K-value and polymerisation route — suspension or emulsion — are named on the offer, because the plant recipe changes with them.
Typical grades
- S-PVC, K-value around 65–67
- Other pipe and profile grades on request
- E-PVC when a suitable cargo is available
Stabilisers and plasticisers are not part of the resin price unless the offer says so.
Request this productBase oils and lubricants
We supply the base oils used to blend engine, hydraulic, and gear oils. A finished lubricant can be offered when the cargo has a named grade. Viscosity and group — I, II, or III — are written on the offer.
Typical grades
- SN 150 and SN 500
- Bright stock
- Group II and III base oils
- Finished engine, hydraulic, and gear oils on request
Packing
- Bulk tanker
- Drums
- Smaller packs for finished oils when available
We do not attach a brand name unless that cargo actually carries it.
Request this productBitumen and asphalt
Bitumen is sold by grade, not by a general description. The penetration grades most used in paving are 40/50, 60/70, and 80/100. Polymer-modified bitumen is offered only when a cargo and a written specification exist.
Typical grades
- Penetration 40/50
- Penetration 60/70
- Penetration 80/100
- Modified bitumen on request
Packing
- Hot bulk tanker where the equipment is available
- New steel drums
- Jumbo bags for solid grades
Hot discharge needs a site that can receive it. We ask about that before fixing the packing method.
Request this productSolvents
Solvents are named, with an approximate purity, not lumped under “solvent”. End use changes the right grade, so it belongs on the enquiry. Transport follows hazardous-goods rules.
Typical grades
- White spirit
- Toluene
- Mixed xylene
- Hexane
- Acetone and MEK
Packing
- Drums
- Bulk tanker when a suitable truck is available
Two solvents are not loaded on one shipment unless that is agreed in writing.
Request this productLPG
LPG is a regulated product. We supply propane, butane, and commercial mix when the cargo and a suitable tanker for the route are both available. We do not promise cylinder delivery in every city.
Typical grades
- Commercial propane
- Commercial butane
- Mixed LPG
Packing
- Licensed bulk tankers
- Cylinders only where the rules and the equipment allow
The receiving site has to be fit for LPG discharge. We check that before committing.
Request this productSulphur
Sulphur is defined by form and approximate purity. Granular material is easier to handle than lumps, and the difference shows up in price and discharge. The form on hand is stated on the offer, not assumed.
Traded purity is typically high. The actual figure comes with the cargo analysis when one exists.
Request this productUrea and fertilizers
Urea is the core of this line: prilled or granular, with total nitrogen commonly at 46%. DAP and MAP are offered when a cargo exists, with the specification written on the offer.
Typical grades
- Granular urea 46% N
- Prilled urea 46% N
- DAP and MAP on request
Packing
- 50 kg bags
- Jumbo bags
- Bulk where the site can receive it
46% is the common market description. The figure that counts is the one on the cargo document.
Request this productIndustrial chemicals
This line is for the materials plants buy regularly that are not polymers. Each one is named with its concentration and form. Acids and liquid caustic move only in a tanker and pack that suit the product and the route.
Typical grades
- Caustic soda flakes around 98%, and liquid around 48–50%
- Soda ash, light and dense
- Methanol and MEG
- LABSA
- Hydrochloric acid and sulphuric acid on request
Packing
- Bags for solids
- Drums
- Tanker for liquids that qualify
Hazardous chemicals are not loaded with food or fertilizer on the same truck.
Request this product